ALUMINUM WELDING EQUIPMENT
TIG 315 P AC DC
Rating
★★★★★ 5/5
ALUMINUM WELDING MACHINE FOR PROFESSIONAL WELDER
DESCRIPTION
FEATURES
SPECIFICATIONS
ACCESSORIES
WARRANTY
GUIDELINES
DESCRIPTION
- Advanced MOSFET Inverter power source for TIG AC DC / MMA welding.
- Adopting PWM control technology, constant current, accurate current control.
- High frequency arc starting,no matter the current is high or low,the arc starting rate high.
- Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
- On the front panel a digital display shows the operator a reading of actual welding current for precise ampere setting.
- High quality potentiometer for smooth current adjustment.
- Fast coupling socket for easy plug in.
- Compact, portable and low energy consumption.
FEATURES
- Adopts advanced MOSFET technology.
- Auto protection against over voltage, over current and thermal protection.
- Soft switching technology brings higher efficiency and more stable performance.
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
- Arc dig function, good arc stability, less spatter and satisfactory welding appearance.
- High welding quality, deep bath and strong weld strength.
- AC DC TIG welder one machine serves several purposes, saving the welding cost.
- Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc
- Suitable for all kind of basic rods.
SPECIFICATIONS
Parameter | Specification | Parameter | Specification |
Supply Voltage (V) | 220VAC ±15% | Duty Cycle (%) | 60 |
Frequency (Hz) | 50/60 | Efficiency (%) | 85 |
Rated Input Current (A) | 12.8 |
Power Factor | 0.93 |
Rated Input Power Capacity (KVA) | 8.4 |
Insulation Class | F |
No-load Voltage (V) | 54 | Housing Protection Grade | IP21S |
Current Adjust Range (A) | 10-315 | Overall Dimension (mm) | 535X 360 X460 |
Rated Output Voltage (V) | 24 |
Weight (Kg) | 20 |
Pre Flow Time (S) | 2 | AC Balance (%) | 20-80 |
Post Flow Time (S) | 0-10 | AC Frequency (Hz) | 60 |
Pulse Frequency (Hz) | 0.5 – 300 | Down Slope (S) | 0-10 |
ACCESSORIES
- A set of Electrode Holder with cable and fast coupling plug.
- A set of Earth Clamp with cable and fast coupling plug.
- TIG welding torch with cable set.
WARRANTY
GUIDELINES
Base Material | Plate Thickness (mm) | Filler Wire Diameter (mm) | Current Range (A) |
MS, SS, ALU, Ni, Cu etc | 0.5 – 4.0 | 1.6/2.4/3.0 | 20 – 200 |
SUPPORT
NEED SPARE PARTS OR CONSUMABLE ?
NEED REPAIRS AND MAINTAINANCE ?
WARRANTY